Identified by its “shark nose” frame-mounted fairing, the Road Glide® gobbles up the highway with rakish style. Hard-shell saddlebags, electronic cruise control, and the 40-watt Advanced Audio System by Harman/Kardon® are standard equipment. Dual covered headlamps and back-slash muffler tips are back for 2009, while the graphics on the fairing, fuel tank and saddlebags are new. A new low-mount license bracket locates the plate below the tail lamp, with new LED illumination.
Photos
Highlights
Columbia, South Carolina
Pre-Owned
646768
2009
Harley-Davidson®
FLTR - Road Glide®
Touring
92.60 ft. lbs. @ 3500 rpm (125.57 NM @ 3500 rpm)
33,062
Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded
6-Speed Cruise Drive
Available
Specifications
2009
Harley-Davidson®
FLTR Road Glide®
Base
Touring
94.10 in. (2390.14 mm)
35.80 in. (909.32 mm)
55 in. (1397 mm)
26.90 in. (683.26 mm) Laden / 29.50 in. (749.30 mm) Unladen
5.10 in. (129.54 mm)
26°
Angle: 29.25°
6.69 in. (169.93 mm)
63.54 in. (1613.92 mm)
D407F BW 130/80B17 65H (Dunlop® Harley-Davidson Series, bias blackwall front and rear)
D407 BW 180/65B16 81H (Dunlop® Harley-Davidson Series, bias blackwall front and rear)
6 gal. (22.71 L) (warning light at approximately 1 gal.)
4 qts. (3.79 L) w/filter
6-Speed Cruise Drive
Case Capacity: 1.40 qts. (1.32 L)
783 lbs. (355.16 kg)
820 lbs. (371.95 kg)
1360 lbs. (616.89 kg)
500 lbs. (226.80 kg)
927 lbs. (420.48 kg)
92.60 ft. lbs. @ 3500 rpm (125.57 NM @ 3500 rpm)
Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
3.75 in. (95.25 mm)
4.38 in. (111.25 mm)
96 cu. in. (1584 cc)
9.2:1
Electronic Sequential Port Fuel Injection (ESPFI)
Fiberglass, washable
Pressurized, dry-sump
Chain, 34/46 ratio
Belt, 32/68 ratio
9-plate, wet
9.593
6.650
4.938
4.000
3.407
2.875
Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded